FAQ

Do you have an example of a program for CNC FANUC DOOSAN?

You can use these few program lines, they are usually good for 99 % of the machines :

T1111 (BUMPSYSTEM recall)

G0 Z30

X0 (or you can use X10, X30 X 50 as the weight of the workpiece increases to obtain a more effective push)

G1G98Z-10F300

M31M69 (opens jaws)

M31M68 (closes jaws)

G0G99Z100

You can use these few program lines, they are usually good for 99 % of the machines :

T1111 (BUMPSYSTEM recall)

G0 Z30

X0 (or you can use X10, X30 X 50 as the weight of the workpiece increases to obtain a more effective push)

G1G98Z-10F300

M31M69 (opens jaws)

M31M68 (closes jaws)

G0G99Z100
Do you have an example of a programme for CNC MAZAK?

You can use these few program lines, they are usually good for 99 % of the machines:

FOR LEFT CHUCK

T0200.1 (BUMPSYSTEM recall)

G53.5Z-2.59 (HD1 ORIGIN)

M901

G18

G0 Z30

X0 (or you can use X10, X30 X 50 as the weight of the part increases to get a more effective push)

G1G98Z-10F300

M206 (opens jaws )M306 (opens jaws FOR RIGHT HAND CHUCK (COUNTER SPINDLE))

M207 (closes jaws) M307 (closes jaws FOR RIGHT HAND CHUCK (COUNTER SPINDLE))

G0G99Z100

You can use these few program lines, they are usually good for 99 % of the machines:

FOR LEFT CHUCK

T0200.1 (BUMPSYSTEM recall)

G53.5Z-2.59 (HD1 ORIGIN)

M901

G18

G0 Z30

X0 (or you can use X10, X30 X 50 as the weight of the part increases to get a more effective push)

G1G98Z-10F300

M206 (opens jaws )M306 (opens jaws FOR RIGHT HAND CHUCK (COUNTER SPINDLE))

M207 (closes jaws) M307 (closes jaws FOR RIGHT HAND CHUCK (COUNTER SPINDLE))

G0G99Z100
Do you have an example programme for CNC DMGMORI?

You can use these few program lines , they are usually good for 99 % of the machines:

T1111 (BUMPSYSTEM recall)

G0 Z30

X0 (or you can use X10, X30 X 50 as the weight of the workpiece increases to obtain a more effective push)

G1G98Z-10F300

M11 (opens jaws)

M10 (closes jaws)

G0G99Z100

You can use these few program lines , they are usually good for 99 % of the machines:

T1111 (BUMPSYSTEM recall)

G0 Z30

X0 (or you can use X10, X30 X 50 as the weight of the workpiece increases to obtain a more effective push)

G1G98Z-10F300

M11 (opens jaws)

M10 (closes jaws)

G0G99Z100
Can it also be used with perforated parts such as rings or raw pipes?

Of course YES, it is only necessary to position the BUMPsystem above the hole, making sure that the thrust is in the direction of a jaw, for proper support, the power of BUMP will do the rest.

Of course YES, it is only necessary to position the BUMPsystem above the hole, making sure that the thrust is in the direction of a jaw, for proper support, the power of BUMP will do the rest.

Need help?

FAQ

Do you have an example of a program for CNC FANUC DOOSAN?

Do you have an example of a programme for CNC MAZAK?

Do you have an example programme for CNC DMGMORI?

Can it also be used with perforated parts such as rings or raw pipes?

Manage your preferences

Technical cookies

Analitycs cookies

Marketing cookies